Industrial SystemsHydrogen Leak Detectors
ILS500 Leak Detection System
Leak Detection System ILS500 is a complete system for leak testing, tracer gas handling, tooling control and test sequencing. It comprises three main modules, housed in a compact cabinet: the Controller Unit, the Detector Unit and the Operator Interface Unit. Equipped with a wide range of accessories, the ILS500 meets all test requirements and offers a large variety of test possibilities. It is available in Standard, Combi Probe and Filler version.
H2000 PLUS -Hydrogen Leak Detector
Hydrogen Leak Detector H2000 PLUS is the new and improved model replacing the old H2000. H2000 PLUS is the ultimate tool for leak detection and leak locating using diluted hydrogen as tracer gas, finding leaks down to 5x10E-7 mbarl/s. New functions such as Auto Ranging and extended bi-directional communication will make your leak testing more efficient than ever before. The picture shows the benchtop model.
H2000-P PLUS - Panel Model
Hydrogen Leak Detector H2000-P PLUS is the panel version of the H2000 PLUS. Designed for integration into industrial leak test systems, H2000-P PLUS allows reliable leak test and tightness control of your test object.
H1000 - Hydrogen Leak Locator
Hydrogen Leak Locator H1000 is your basic tool for pin-pointing leaks on components and systems. It will help you to pin-point even minute leaks in small objects such as seals, gaskets, and valves, as well as in large objects such as fuel tanks, heat exchangers and engines. The H1000 is fully electronic with no moving parts and is water protected ( IP64). The high performance Li-Ion battery gives you 13 hours of run-time.
H2000-C PLUS - Hydrogen Leak Detector
H2000-C PLUS is a portable (5 kgs / 11 lbs), battery operated version of the Hydrogen Leak Detector H2000 PLUS. The H2000-C PLUS can also be run continuously from the battery charger.
Extrima - Hydrogen Leak Detector
Extrima Leak Detector is the world’s first intrinsically safe leak detector using Hydrogen tracer gas, designed for leak detection in the toughest of environments, including explosion hazardous areas. Extrima fulfills the ATEX directive for use in Zone 0 – ATEX Classification Ex ia, IIC T3. Additional Ex-certificates are IECEx, CSA and NEPSI. Portable (4,5 kg), water protected (IP67) and with 7 hours battery capacity, Extrima can be applied in the chemical, petrochemical, aviation and petroleum industries.
9012XRS - Hydrogen Leak Detector
Hydrogen Leak Detector 9012XRS is a considerable improvement of the well proven, never surpassed, Hydrogen Leak Detector 8012. It is not only lighter, tougher and smarter - it helps you to locate leaks much quicker and save time and money.
Sensistor, today Adixen, is the pioneer that created the Hydrogen Method for leak detection. This method is today used all over the world in a multitude of applications. Welcome to have a look at the world of Hydrogen Leak Detection.